These tools help you to find the default IP address or current IP address of your surveillance camera system. 1 (that matches the PoE gateway of the Hikvision NVR). By default, Hikvision will use the proprietary HIKVISION protocol, but they also support use of the open source protocol ONVIF which is used with Gamut recorders and cameras. Select From Millions of Products for your Business. Step 1: Configure your Hikvision (or Onvif) IP Camera.CameraFTP VSS software can use a PC as a CCTV DVR system. Open up an Internet browser and type in the IP address of the NVR. When the user lost/forgot a password, Hikvision offers two methods of the restoration of the default password, depending on the firmware version (for firmware versions above V3. Once you have downloaded and installed Hikvision’s iVMS-4200 Client, you can open iVMS-4200 and use the Device Management screen found in the Device Management tab (shown below) and to add, configure new and existing devices, as well as remove devices. Source: How to configure Hikvision IP camera with NVR (DS-7616NI-I2-16P-4k-POE) – Learn CCTV.Change your PC's IP address to the same format as the default cameras IP and connect it to the PC's ethernet port for a direct connection. Hikvision ip camera config tool Intercom Designer.
